Product Description

The name "Monitor" is special to Polk Audio. The original Polk Audio Monitor Series, produced in the mid-1970s, ushered in the modern loudspeaker era by setting the standard for performance and value. The original Monitor Series is the line that made Polk Audio famous with its simple, sturdy construction, clear, accurate sound, powerful bass and superior imaging, all at a price that made great sound available to everyone. The newly reborn Monitor Series by Polk Audio is classic Polk: a quality-built, affordable line of high performance loudspeakers for music and home theater. The new PSW10 complements the clean, stylish look of the whole line with powerful, efficient, accurate and musical bass in compact enclosures. Built for speed, power and value, the Monitor Series is a great introduction to high performance sound. Non-resonant MDF construction with 3/4" baffle and internal bracing for deep bass impact with superior detail, accuracy and musicality. 10" Dynamic Balance Composite Woofer Drivers for "tight" musical bass. State-of-the-art laser-based Klippel measurementtechnology perfectly centers the subwoofer's voice coil in its magnetic field for improved linearity and deep, precise bass. Built-in High Current Amplifier supplies all the good, clean power you need for big bass. LINE and SPEAKER level inputs ensure easy hook-up compatibility with virtually any system. Amplifier features Adjustable Low-Pass Crossover, Phase Switch and Subwoofer Volume Control to more easily control your bass output and the sub¡¦s blending characteristics with your front stage speakers. Signal-sensing "smart amp" Auto ON/OFF Circuitry knows when to turn itself on and off.

---

Product Details

• Amazon Sales Rank: #317 in Consumer Electronics
• Size: 10 Inch
• Color: Black
• Brand: Polk Audio
• Model: AM1055-C
• Number of items: 1
• Dimensions: 18.00" h x 18.00" w x 20.00" l, 31.00 pounds

Features

• A single 10-inch subwoofer with built-in high-current amplifier for big bass
• Equipped with one 10-inch polymer-composite dynamic-balance cone driver
• Features laser-based Klippel measurement technology for improved linearity and deep, precise sound
• Frequency Response: 35Hz - 200Hz
• Non-resonant all-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing

Amazon.com Product Description
Give your movies and music the rich, powerful audio they deserve with the Polk Audio PSW10 powered subwoofer. Hailing from Polk's reborn Monitor series--which ushered in the modern loudspeaker era in the mid-1970s--the sub combines quality construction with high-end performance, all for a price that won't break the bank. The PSW10 is equipped with a 10-inch polymer-composite cone driver that creates tight, musical bass, along with state-of-the-art laser-based Klippel measurement technology to perfectly center the voice coil within the magnetic field. The Klippel technology improves the linearity of the frequencies to ensure a deep, precise sound for everything from action-movie explosions to cello musical passages.

Adding to the quality is the non-resonant medium-density fiberboard (MDF) enclosure, the 0.75-inch baffles, and the internal bracing, all of which contribute to the sub's superior detail, accuracy, and musicality. Meanwhile, the PSW10's built-in high-current amplifier (50 watts RMS, 100 watts dynamic) supplies all the power you need for big bass, while the adjustable low-pass crossover, phase switch, and volume control make it easy to blend your sub's output with your front and rear speakers. The sub even includes automatic signal-sensing circuitry, meaning it knows when to turn itself on and off.

Though the PSW10 will work with any speakers, the sub specifically designed to complement the clean, stylish look and robust sounds of Polk's entire Monitor speaker line. The black oak finish is particularly compelling, with a style that fits seamlessly with most modern furnishings.

Connectivity stems from the line- and speaker-level inputs, along with the unfiltered LFE input. The combined options make it easy to connect the PSW10 with any receiver or amplifier. And movie fans will delight in the magnetic shielding, which protects nearby TVs and video monitors from video distortion. Measuring 14 by 14.38 by 16.12 inches (W x H x D) and backed by a five-year warranty on the speaker and a three-year warranty on the internal amp, the PSW10 makes a great introduction to powerful home theater sound.

What's in the Box
PSW10 subwoofer, removable grille, registration card, user's manual.

From the Manufacturer
The Polk Audio Monitor Series PSW10 Powered Subwoofer is a quality-built yet affordable, high-performance loudspeaker for music and home theater. The PSW10 complements the clean, stylish look of the Monitor Series with powerful, efficient, accurate and musical bass in a compact enclosure with a sleek black finish.

The Polk Monitor PSW10 utilizes a 10-inch polymer-composite dynamic-balance cone driver for tight musical bass, as well as state-of-the-art laser-based Klippel measurement technology that perfectly centers the subwoofer's voice coil in its magnetic field for improved linearity and deep, precise sound. This unit's non-resonant all-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing ensures superior detail, accuracy and musicality. The PSW10 includes a built-in high-current amplifier that supplies all the power you need for big bass. This amp features adjustable low-pass crossover, phase switch and subwoofer volume control to more easily control your bass output and the sub's blending characteristics with your front stage speakers, and signal-sensing automatic circuitry that knows when to turn itself on and off. The PSW10 unit includes line and speaker level inputs plus an unfiltered LFE Input that ensures easy hookup with any receiver or amplifier, and magnetic shielding for safe placement near TVs and video monitors without causing video distortion. Built for speed, power and value, the Polk Monitor PSW10 is a great introduction to high-performance sound.

What's in the Box
PSW10 subwoofer, grille, owner's manual, and registration card.

---

Customer Reviews

Polk PSW-10: Great, with some reservations
I purchased this subwoofer about 2 months ago and since then have given it an extensive listening test. Following is a list of things I would do to improve sound quality as well as some reservations I have toward it.

Before I start off, I would like to clarify one thing about the PSW-10 that might unjustly turn off potential buyers from it: it runs at 50 watts RMS. In the world of music and sound systems, one of the biggest misconceptions out there is that wattage directly correlates with how loud a speaker is. THIS IS NOT NECCESARILY TRUE! The efficiency of the driver determines how loud it gets at a certain wattage, not only the amount of power you're pumping into it! This is why you can buy, for example, computer speakers that boast 400watts of power and have them easily massacred in terms of volume by speaker set ups with half the power (for further examples, compare computer speaker systems to shelf systems to a true sound system. You will find the volume, at a given wattage, tends to increase as you go down the spectrum).

I found the PSW-10 easily competed in terms of volume with every other sub in it's range, including those running at twice to three times the power RMS. If you want to prove it to yourself, run down to your local Circuit City (who sells Polk subs) and sound test it yourself.

Now, onto the guts of the review.

1. As far as entry subwoofers come, this is probably the best bang for your buck that you can find bar none, especially considering the quality of the build. Built around high quality medium density fiberboard and using a highly efficient 10" driver, the PSW-10 manages to bang as well, if not louder, than other subwoofers in this category, despite running at 50 watts RMS.

2. The sound quality is excellent, with very little distortion at high volumes above 50 hz or so, with full excursion easily being reached because of the ported design. In the 40hz - 50hz range, the polk begins to show the limitations of an entry level sub, the sound becoming slightly more muddied (though not horribly so) with extended length sounds(ie. a hellicopter landing slowly) while still staying crisp for burst noise (ie. a gunshot or bassdrum). Below the 40hz, it's pretty much non-functional as a subwoofer. I should also stress that no entry subwoofer has any redeeming qualities below 40hz.

3. Music is where this subwoofer really shines! It's bass is perfect for every genre of music (my tastes tend to be a bit ecclectic and as such I tested it with Classical, Hip Hop, Electronica, Rock, and Jazz) you can throw at it. I was most impressed when playing The Chieftans "Ballad of the Irish Horse" album and could have sworn the drums were playing in the room (a testament to the quality of polk's design). Deep bass is 99.9% of the time is limited to above 50hz, right in the sweet spot of the polk, and as such, the bass lines in every Rap song I tried (the extreme being Wolfpak - Gangsta Rap and Kanye West - Golddigger) was quite impressive, accurate and crisp. When playing the 1812 Overature, the cannons were well produced, if very slightly muddied (as it is one of the few songs that ventures below 50hz) but overall very good. I was very impressed with the sound quality of the polk in music.

4. That being said, this subwoofer is ideal for music and will be disappointing for those who wish to use it for movie watching. While it is beneficial to add it to any non-subwoofer setup, the 10" driver struggles to hit the low lows with the sound becoming muddied with deep, deep bass of any length. I found this to be a problem with all entry subwoofers I've tried, not just the polk, so take this with a grain of salt.

Overall, this subwoofer is probably the best entry subwoofer you can get bar none.

TIPS FOR MAKING IT SOUND BETTER!!!

1. First thing of note: Like all quality entry level subwoofers, great sound comes with the sacrifice of volume. This sub works best in smaller rooms, say 20x10 maximum. Any larger and the sound will begin to get lost in the room and sound strained.

2. Most subwoofers work the best along the front wall of your sound system, in the corner. This however is not a cardinal rule. To find the best location for the subwoofer (this works for any sub for your information), place the subwoofer where you would normally be sitting, listening to it. Play a song and walk around the room until you find place where the bass sounds the best. Move the sub to that location and it should be ideally placed!

3. One shortcoming about the Polk is the lack of an LFE input: you only get RCA and speaker line inputs meaning that there is no way you can bypass the internal crossover of the sub. Considering the market it's aiming for, this shouldn't be too big of a problem for most people, but owners with good receivers might be a bit vexed by this. Also, do not hookup the sub through the speaker line: it'll lose a fair amount of sound quality from forcing the bass through small gauge wires. Hook it up through the RCA if at all possible and you will be greatly rewarded.

In summation, despite the reservations inherent of the entry level subwoofer class (and LFE port), this is an excellent subwoofer which warrants all the praise it's been getting.

Polk Audio PSW10 Powered Subwoofer
While I was looking for sub-woofer I was comparing PSW10 and PSW404. PSW404 sounds better but for the price $110 vs. $250 at J&R I opted for PSW10. The sale representative dropped the price for me even though they still selling PSW10 for $200 here. Those of you who worry about no LFE input, that shouldn't be a problem. All you have to do is connect the sub-woofer output of the receiver to either the right or left input on the sub-woofer. And then set the variable low pass filter on the sub-woofer to the highest setting. This will set the internal low pass filter above the low pass filter frequency given by your receiver and create an LFE input. Or you may use a RCA cable to provide a connection to both inputs on the sub-woofer from the LR pre-out from the receiver. Then adjust the cross over frequency from the woofer as desired. It sounds a little louder and better for me. I bought Monster sub-woofer cable and it sounds no better than RCA cable. Try not to waste your money on this. It has 7.4 out of 10 in CNet rating and it is #6 in editor's top list for sub-woofers. I matched PSW10 with R300, RTi4, R150, CSi3 and Denon 1906 receiver. Mainly used for HDTV over the air, DVD movies and some FM. It sounds a lot better than the sub-woofer from RM6750. It carries 5 years warranty but make sure you buy from Authorize dealer. For the price I paid I am more than happy with it. I hope this helps to your decision.

Excellent sound
I'm using this with an Onkyo TR-606 alongside a Toshiba 62" DLP HDTV and a full set of Polk speakers, and the sound quality is remarkable.

The only caveat is that the subwoofer input has two connectors, but you really only need to connect one of them. The manual is far from clear about this, and plenty of people will probably spend extra on a Y cable, or worse yet, put in an adapter which will add both cost and loss of fidelity. But just connecting to the left input works fine. Subwoofers are mono anyway, and the double inputs are primarily there to make certain wiring configurations easier, not to add more sound fidelity.

......................................................................................................................................Last update : 2010-09-02 13:56:14